| Model |
SGPM-110II |
| Capacity/Pressure(m3/min,/BAR) |
24.5/0.7 |
23.5/0.8 |
19.7/1.0 |
17.6/1.3 |
| Motor |
Power(KW) |
110 |
| Speed(r/min) |
2980 |
| Volt(V) |
380 |
| Motor safety grade |
IP54 |
| Electrical Supply |
380V/50Hz/3Phase(customizable) |
| Lubricating oil quantity(L) |
120 |
| Outlet Temperature(ºC) |
≤ ambient Temperature+15ºC |
| Driven way |
Direct Driven |
| Noise level at 1 meter |
72±3dB(A) |
| Cooled method |
Air /Water cooling |
| Oil content |
<3ppm |
| Outlet Connection |
DN80 |
| Dimension |
Length(mm) |
3150 |
| Width(mm) |
1980 |
| Height(mm) |
2150 |
| Weight(kg) |
|
4200 |
Introduction of double stage screw air compressor
Double stage screw air compressor in the main parts with double screw,the compression process by the first stage screw and second screw through grading series compression.
Double screw air compressor in addition to uphold twin-screw compressor has the advantages of simple structure,flexible installation and high efficiency,but also highlights the advantages of their own efficient,energy-saving:
1.can reduce the bearing load,improve volume efficiency,
2.in the case of some load operation,can improve efficlency,energy saving.
Double screw air compressor than twin-screw compressor energy saving up to 15%,each run for 8000 hours a year, Annual savings of about 200 thousand yuan electricity.
Advantage of two stage screw air compressor
1. Hierarchical compression to save compression work
Through the two-stage series process, the original single-stage compression process is divided into two compression processes. Such a process setting can reduce the ratio of each single-stage compression process, which can effectively reduce the compression and compression of each stage screw. Required drive power.
In the process of ideal gas compression, the sum of the power required for single-stage pressure transmission and the power required for multi-stage compression is equal, but in the actual compression process, due to a series of factors such as the transmission power loss of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the increase of the applied force, the useless power exceeding the same ratio is generated, so the useless power in the actual compression process can be reduced by reducing the compression ratio of each stage, so that the sum of the power required for multi-stage compression is less than that of single-stage compression Required power.
2. The intermediate warm oil cools and reduces the temperature of the gas entering the next stage. All the gas compression process is actually the process of the friction between the gas and the moving parts and being compressed by it.
In the presence of friction, the gas will rise in temperature due to friction, and there will inevitably be a trend of shadow accounts. This part of energy will be released in the form of force in the fixed volume of air compression by increasing its own pressure.
The temperature rise of the gas increases the pressure of the gas itself during the compression process and increases the compression ratio. Therefore, it is necessary to pay extra power to drive the equipment to shrink the air to the desired pressure value. Therefore, the two-stage screw compressor is provided with a coolant injection curtain device.
Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What's your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What's the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
If you have any questions, please don't hesitate to contact us. Thanks!
){kind=link}