160kw 200HP Big Power Large Flow Electrical Twin Screw Air Compressor

Product Description

Product Description

Model	SGPM-160II
Capacity/Pressure(m3/min,/BAR)	34.5/0.7	33.6/0.8	30.0/1.0	23.8/1.3
Motor	160/200
	IP54/IP55
Electrical Supply	380V/50Hz/3Phase(customizable)
Lubricating oil quantity(L)	120
Outlet Temperature(ºC)	≤ ambient Temperature+15ºC
Driven way	Direct Driven
Noise level at 1 meter	70±2dB(A)
Cooled method	Air /Water cooling
Oil content	<3ppm
Dimension	2850*1600*2000mm
Weight(kg)	4300kg

Introduction of double stage screw air compressor 
Double stage screw air compressor in the main parts with double screw,the compression process by the first stage screw and second screw through grading series compression.
Double screw air compressor in addition to uphold twin-screw compressor has the advantages of simple structure,flexible installation and high efficiency,but also highlights the advantages of their own efficient,energy-saving:
1.can reduce the bearing load,improve volume efficiency,
2.in the case of some load operation,can improve efficlency,energy saving.
Double screw air compressor than twin-screw compressor energy saving up to 15%,each run for 8000 hours a year, Annual savings of about 200 thousand yuan electricity.
Advantage of two stage screw air compressor 
1. Hierarchical compression to save compression work
Through the two-stage series process, the original single-stage compression process is divided into two compression processes. Such a process setting can reduce the ratio of each single-stage compression process, which can effectively reduce the compression and compression of each stage screw. Required drive power.
In the process of ideal gas compression, the sum of the power required for single-stage pressure transmission and the power required for multi-stage compression is equal, but in the actual compression process, due to a series of factors such as the transmission power loss of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the increase of the applied force, the useless power exceeding the same ratio is generated, so the useless power in the actual compression process can be reduced by reducing the compression ratio of each stage, so that the sum of the power required for multi-stage compression is less than that of single-stage compression Required power.
2. The intermediate warm oil cools and reduces the temperature of the gas entering the next stage. All the gas compression process is actually the process of the friction between the gas and the moving parts and being compressed by it.
In the presence of friction, the gas will rise in temperature due to friction, and there will inevitably be a trend of shadow accounts. This part of energy will be released in the form of force in the fixed volume of air compression by increasing its own pressure.
The temperature rise of the gas increases the pressure of the gas itself during the compression process and increases the compression ratio. Therefore, it is necessary to pay extra power to drive the equipment to shrink the air to the desired pressure value. Therefore, the two-stage screw compressor is provided with a coolant injection curtain device.

Product Parameters

Model	Working Pressure		Capacity		Motor Power	Dimension (mm)	Net Weight (KGS)	Air Outlet Pipe Diameter
	Psi	bar	Cfm	m3/min	kw/hp
SGPM22II	100	7	148.4	4.2	22/30	1660*1085*1400	700	1 1/2
	116	8	144.9	4.1
	145	10	123.7	3.5
	188	13	113.1	3.2
SGPM30II	102	7	222.6	6.3	30/40	1660*1085*1400	800	1 1/2
	116	8	208.5	5.9
	145	10	173.1	4.9
	188	13	148.4	4.2
SGPM37II	102	7	254.4	7.2	37/50	1660*1085*1400	850	1 1/2
	116	8	243.8	6.9
	145	10	222.6	6.3
	188	13	190.8	5.4
SGPM45II	102	7	346.3	9.8	45/60	2100*1360*1880	1550	2
	116	8	342.7	9.7
	145	10	303.9	8.6
	188	12	275.6	7.8
SGPM55II	102	7	452.3	12.8	55/75	2100*1360*1880	1550	2 1/2
	116	8	441.7	12.5
	145	10	339.2	9.6
	188	13	303.9	8.6
SGPM75II	102	7	618.3	17.5	75/100	2100*1360*1880	1600	2
	116	8	583.0	16.5
	145	10	441.7	12.5
	188	13	395.7	11.2
SGPM90II	102	7	734.9	20.8	90/120	2300*1470*1840	2400	2 1/2
	116	8	699.6	19.8
	145	10	597.1	16.9
	188	12	505.3	14.3
SGPM110II	102	7	865.7	24.5	110/150	2300*1470*1840	2400	2 1/2
	116	8	830.3	23.5
	145	10	696.1	19.7
	188	13	621.9	17.6
SGPM132II	102	7	1060.0	30.0	132/175	1950*1420*1840	3200	DN65
	116	8	989.3	28.0
	145	10	830.3	23.5
	188	13	699.6	19.8
SGPM160II	102	7	1219.0	34.5	160/200	2850*1600*2000	4300	2 1/2
	116	8	1187.2	33.6
	145	10	1060.0	30.0
	188	13	840.9	23.8
SGPM185II	102	7	1512.3	42.8	185/250	3600*2100*2190	5450	DN100
	116	8	1409.8	39.9
	145	10	1148.3	32.5
	188	13	1010.5	28.6
SGPM220II	102	7	1625.3	46.0	220/300	3600*2100*2190	5500	DN100
	116	8	1554.7	44.0
	145	10	1448.7	41.0
	188	13	1236.7	35.0
Motor Protection Class: IP54/IP55 or as per your required
Voltage: 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Company Profile

FAQ

Q1: What is the rotor speed for the air end?
A1: 1500rmp.

Q2: What's your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).

Q4: What's the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.

Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.